Three Greatest Moments In Window Handle Replacement History

Choosing the Right Window Handle For Your UPVC Window

The right window handle is essential to a well-fitting uPVC window. You'll want a design that is not only functional, but also matches the style of your home.

It is simple to change it is easy to change a uPVC handle. All you require are the tools listed below and just a few minutes of your time.

Metal

Metal window handles are both a decorative piece as well as an essential piece of hardware to increase the security of your home. There are many metal window handle options that can be adapted to various frames and materials. Certain of these handles are specifically created for sash windows in order to in making opening and closing the window smoother and less likely to block. If you're looking for a more secure option, there are several locking mechanisms designed to block the window from being opened beyond a certain level.

Espag handles are probably the most well-known type of window handle found on UPVC windows. They feature a mental spindle at the back which is fixed to the frame of the window and controls the window mechanism. They are found on both UPVC and aluminium windows.

Cockspur handles are found on older upvc door handles window frames. They can be more difficult to operate than modern Espag handles since they are based on an old-fashioned peg locking mechanism.

For a sleeker design, there are also cam handles that are available. These have a refined edge and are designed to be compatible with many other types of uPVC windows. They work well on tilt and turn windows where it is possible to open the window from the bottom while still allowing the top to be opened.

When choosing new metal window handles, it is essential to take into account a variety of aspects such as the step height as well as the direction in which the handle will be rotated. The distance between the bottom and the underside of the screw plate is the primary aspect to take into account. The second aspect to consider is the direction in which the handle can be turned. Some handles can only rotate in only one direction, like clockwise. Others can only rotate in the opposite direction.

Plastic

There are many varieties of plastic window handles. They are all designed to operate windows and protect them from invaders. They are available in a variety of colours and styles to match uPVC and aluminium windows. Some are also designed to include a lock. This increases security and lets you leave the window open, while being secure from burglars.

Different situations can trigger window handle problems. Sometimes, they might not be able to turn correctly. This could be due to dust getting into the mechanism, causing obstruction or dirt. Another common problem occurs when the window handle starts walking tightly or clings to something. This is an indicator that the window handle needs attention.

If this happens, it's important to call a specialist. They can help you solve the issue swiftly and efficiently. They can also offer advice on replacing a plastic window handle with a new one that will work better and more reliably.

Most manufacturers will use the exact same fasteners, no matter what type of handle you're using. It's therefore easy to replace the window handle and lock using the exact model.

When you're trying to find the right replacement handle, it's important to be aware of your window's size and design. This will allow you to find the right handle that will fit your windows perfectly and won't cause problems. Also, be sure to be aware of the spindle length that is the measurement of how far the handle extends beyond the base. This is an important factor if you want to use your new window handle with a limiter installed.

Casement

Casement windows are hinged at the top and bottom just like awning windows. They are open in a horizontal direction to the left or right, rather than vertically. They're easy to clean and provide a fantastic view of your backyard or garden, as well as letting fresh air in. They're a popular option for new construction, and they can also add an architectural element to older homes as well. As time passes, they may become difficult to open or close due to worn-out hardware or stripped gears. In some instances window specialists may need to replace the crank mechanism.

Casement windows or awning windows typically have a roto-gear and crank system that allows the window to be opened and closed however, they also have the ability to lock to keep the sash securely in place when closed. The lock on a awning window works with the bezel locks to secure the window. Many people tend to overtighten the handle on a casement window. This can cause the locking mechanisms to work against each with the windows to bind and not close or open properly.

Over time the handle on the window could also wear out. This could happen when the window is shut and opened repeatedly for an extended period of time. It could be a problem when the window was used as a prop while it was open and causing the handle to be pushed against and damaging the crank shaft or gears.

Fortunately, replacing upvc window handles a casing or window crank handle for awning is a simple DIY window repair that could save you money in the long term. First, you'll need to locate the trim mounting screw that holds the casement cover (Photo 3). After removing the screws you can take off the handle that was previously used and examine the crank mechanism. The gears can sometimes be reflubricated, but if already worn out, it's the time to replace them.

Cockspur

Cockspur handles are typically found on older uPVC windows and doors, as well as timber and aluminum. They are simple to use, lock using the use of a key, and also provide a barrier against cold and noise from the outside. The handle opens by pressing down on the lever and the cockspur nose shuts over a wedge striker in the frame to seal the window on closing. By replacing both the handle and the wedge of the cockspur, you will increase the efficiency of double glazing handle-glazed windows and security.

The replacement cockspur handles are available for left and right-handed windows and are operated by turning them 90degrees. They are fitted with a small 'spur' that presses against the PVC wedge that is attached to the frame of the window to create a secure closure. The handles are simple to put in and come with various finishes, including black, white, satin chrome and PVD gold.

It can be difficult to determine the backset of the cockspur, particularly if you are replacing a handle that was previously used. This handle has been designed to solve this issue and features 3 packers of different thicknesses that can be positioned on the underside of the handle nose to provide a variety of backset heights such as 9mm, 13mm, 17mm and 21mm.

The Schlosser Technik Apto is a premium replacement cockspur, with flexible screw fixing centers. It can be used for many applications between 9mm to 21mm. It is also simple to put in with key locking and is available in various finishes.

This cockspur handle is suitable for tilt and turn windows, however, it is not suitable for a side-opening casement window (these require a separate tilt and pivot). This handle can be used to replace damaged or outdated handles on uPVC and aluminium frames using rivets instead of screws. You will require a rivet gun and rivets to attach this handle on your window frame.

Espagnolette

The mechanism that locks your uPVC window is the espagnolette lock, also known as a shootbolt. They are a common feature in older homes and provide both aesthetics and security for your home. Espagnolette handles can be key-locking or non-key-locking. They are available in both cranked and inline designs. They can also be straight or curved design. The key-locking push button adds additional security by preventing the handle from being pulled open from the outside using an extremely long screw driver that is stuck between the frames - a frequent method of burglary!

GB DIY Store offers a wide range of espagnolette handles. It is essential to determine the size of the spindle on your current espag handle before ordering a replacement. Once you have done this, simply browse our selection of espag replacement handles to find the perfect style for your windows.

We stock a fantastic selection of white uPVC inline espagnolette Handles For sliding patio door handle replacement Doors - Funsilo.Date - that come in both key-locking and non-key-locking options. You can choose from a range of colors and spindle sizes to match your new handles with the existing window frame or décor. Our espagnolette handle collection features contemporary and contemporary styles as traditional designs. Each replacement handle comes with a 5 different magnetic spindle lengths between 15mm and55mm, making it easy to fit the handle to your window without having to purchase the exact size of screw!

A clever rose on the back of the rose will ensure that the spindle is placed in the right spot and can only be inserted using the left-hand or right-hand lever, preventing any accidents. A spindle made of metal helps to hold the handle of the espagnolette in place and the handle is held firmly in place by the clever click-fit mechanism that engages when the handle is turned by hand to emit an audible click'.