How To Explain Saab 93 Key Fob To Your Grandparents

How to Replace a saab key battery 9-3 Key

The Saab 9-3 is an excellent car that has a lot of appeal for drivers. It has excellent visibility and a strong performance engine. It has a very high safety rating.

However, it is important to make sure that you have at the very least two keys working for your vehicle. If you lose only one key, it could be expensive to replace it with a new one.

How to Replace the Ignition Key in the Saab9-3

You must replace your car key when it doesn't turn. This guide will walk you through how to do it on the saab 9-3 replacement key 9-3. You'll have to replace the key, buy an additional reprogrammable cell and buy a brand new case for your key-fob.

Unlike older models, most modern Saab vehicles use a transponder on the key-fob rather than a physical metal key to unlock and start the vehicle. The reprogrammable batteries in the key-fob eventually wear out, and they cannot hold any charge. This is especially true if you use the same key for the same lock.

The good part is that the battery is easily replaced by a professional locksmith. If you have the proper tools and patience, you can do it yourself. The first step is to take the key-fob off. This is done by inserting a flathead screwdriver into the slot in the middle of the case. It is essential to work slowly, as the plastic is very thin and can be damaged easily.

Once the case is opened and you are able to prepare the new key by combining the lower portion of the previous key with the banana and transponder on the new key. This will ensure the new key is properly paired to your CIM and could make a huge difference when replacing the sole key of your Saab 9-3.

How to Replace the Ignition Key in a Saab 900

Unless you have two keys, you'll need to remove the dashboard and steering wheel in order to access the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you are able to remove the dashboard and trim pieces around the steering wheel. Once the dash has been removed, you can put an screwdriver into the opening behind the ignition switch.

The ignition cylinder is equipped with the key lock, which can stop the vehicle from starting if the key isn't inside it. If the ignition switch of your 900 isn't functioning, check the key to determine if it's in the lock or stuck in the ignition barrel. It's also a good idea to rotate your keys on a regular basis and keep them clean to ensure that they don't get bent.

Saab cars differ from other vehicles in that they don't utilize traditional keys made of metal. Instead, the car recognizes the key fob's electric signals through a special chip in it.

If you lose just one working key fob, your dealer will charge you the cost of replacing your computer module (also called the CIM). However, we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. You will save over 50% on the price charged by the dealer! We call it the saab replacement keys uk Key PROGRAM. Learn more about it here!

How to replace the ignition Key on a saab car key 9-5

The metal portion of a classic Saab key is simple to copy, and also not much of a deterrent against vehicle theft. The real protection is the electronic component inside the key-fob. It has a chip inside that can recognize your vehicle when it's put into the ignition switch.

Saab's anti-theft system has been relying on this technology for more than a decade. It's not as effective as an actual lock on the door, but it does make the process of stealing your vehicle more difficult. Every Saab owner should keep a spare saab key programmer key in their vehicle.

Most new Saabs come with two keys in the factory. However, you can add more at an authorized dealer using a handheld computer called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 vehicles, which come with newer, more modern features that require a different key-fob and operate using a different procedure.

The dealer will replace the CIM or TWICE module of those vehicles if all keys have been lost, and charge you a premium for doing it. But we can reprogram the EEPROM in your existing computer and prepare it to accept new keys, without having to replace the expensive modules.

How do I replace the ignition Key in an XC90 Saab

If your SAAB 9-3 key fob begins having issues turning the lock barrel it could be time to replace it. The process is relatively simple and doesn't require you to visit an agent. You can complete the process at home using a few basic tools.

In the beginning, you'll need to prepare the new key. Before you begin, disable the anti-theft system by placing blocks underneath your rear wheels and releasing your handbrake. Then, you can put the key in the ignition and turn it to the on position that activates the accessories but doesn't start the engine. Repeat this procedure five times, and then leave the key in the on position.

Then you'll need to buy a new case for your key fob. You can get these at any auto parts store, and they're usually quite affordable. Depending on the model, you may even buy them without electronic components.

To open the case, insert a flathead screwdriver in the slot located in the middle. Gently work it. The case should break easily, and once you do, you'll have access to the internal electronics. Use a flathead screwdriver, which will gently pry open the electronics.