Three Greatest Moments In Window Handle Replacement History

Choosing the Right Window Handle For Your UPVC Window

The proper window handle is essential to a properly fitted uPVC. You'll need a style that is not only functional, but also complements the style of your home.

Changing a uPVC window handle is very simple. All you need is the tools listed below and only a few minutes of your time.

Metal

The window handle made of metal can be a beautiful accent and is an essential piece of hardware to improve security at home. A range of metal window handles are available, which can be fitted to different frames and materials. Certain designs are designed specifically for sash windows, to in making opening and closing the window easier and less likely to jam. There are many locks made of metal that stop the window from opening beyond a certain point.

Espag handles are perhaps the most well-known kind of window handle that is used on UPVC windows. They have a spindle mental on the back that is connected to the window frame which drives the window mechanism. Both UPVC and aluminum windows come with them.

Cockspur handles can be found on older UPVC window frames. They are more difficult to operate than modern Espag handles since they are based on the traditional locking mechanism for pegs.

For a more sleek design there are cam handles available. They feature a refined edge and are designed to work with a variety of upvc replacement window handles windows. They work well on tilt and turn windows where it is possible to open the window from the bottom while still allowing the top of the window to be opened.

It is important to take a number of factors into consideration when choosing new window handles made of steel such as step height and which way the handle turns. The distance between the bottom and the underside of the screw plate is the most important thing to take into consideration. The second factor is the direction in which the handle will be turned. For instance, some handles only rotate clockwise while others can be turned anti-clockwise.

Plastic

There are a variety of window handles made of plastic. All are designed to operate windows and secure them from intruders. They are available in a variety of styles and colours to suit uPVC and aluminium windows. Some windows are also designed to include a lock. This gives added security and allows you to open the window while protecting it from intruders.

Window handle issues can develop in a myriad of situations. Sometimes, they might not be able to rotate properly. This could be due to dust getting into the mechanism and causing dirt or a blockage. Another issue that is common is when the window locking handles - check - handle starts moving in a tight manner or is clinging to something. This is a sign the window handle is in need of attention.

It is crucial to speak with a specialist when this happens. They can help you resolve the issue quickly and efficiently. They can also offer suggestions on how to replace a plastic handle with one that is more reliable and will perform better.

Whatever type of handle you have, most manufacturers will utilize the same fasteners. This means it's easy to replace your window handle and lock using a exact match.

When it comes to finding the right replacement handle, it's best to be aware of your window's size and design. This will help ensure that you buy a handle that is perfect and won't cause any issues with your existing windows. Note the size of the spindle - it's the distance the handle extends from its base. This is important if you plan to utilize a window handle with restrictions.

Casement

Like awning windows, casement windows hinge on the top and bottom, however they open sideways to the left or right rather than opening vertically. They are easy to clean and offer a stunning view of your backyard or garden, in addition to permitting fresh air to enter. They're a popular option for new construction and can also be a great addition to the architectural appeal of older homes. However, over time they may become difficult to open or close due to worn-out hardware or damaged gears. In certain cases windows, a professional might need to replace the entire crank mechanism.

Casement or awning windows typically come with a roto-gear or crank system that allows the window to open and close, but they also feature a locking mechanism to keep the sash in place when closed. The lock on a casement window works in conjunction with the bezel frames to close the window. Many people tend to overtighten the operating handle on the casement windows. This could cause the locking mechanisms to operate against each and cause the windows to bind and not be able to open or close properly.

It is also normal for the handle of the window crank to become stripped over time. This is usually the case when the window is shut and opened repeatedly for many years. It could also happen if the window is used as a prop while it's open, which causes its operating handle to rub against the crank shaft and gears.

Fortunately, replacing a casing or window crank handle for awning is a simple DIY window repair that can save you money in the long time. The first thing you'll need do is locate the trim mounting screws that hold the casement cover in place (Photo 3). After removing the screws you can take off the handle that was previously used and examine the crank mechanism. The gears may be renewed lubricated, but if they're already stripped, it's time for a replacement.

Cockspur

Cockspur handles are commonly found on older uPVC windows, as well as aluminum and timber. They lock using a key, simple to operate and offer an effective shield against cold and noise from outside. The handle opens outwards by pressing down on the lever and the cockspur nose closes over a wedge striker within the frame to seal the window on closing. By replacing both the handle and the wedge of the cockspur, you will increase the efficiency of double-glazed windows and security.

The replacement cockspur handles are available for left and right-handed windows. They are operated by turning them 90degrees. They have tiny'spurs' that pushes against the PVC wedge on the window frame to provide a secure closure. These handles are easy-to-install and come in various styles including satin chrome, white, and PVD gold.

The backset measurement of a cockspur handle can be tricky, especially when you're replacing an existing handle. This handle was created to solve the problem. It has 3 packers with different thicknesses that can be positioned on the underside the handle nose.

The Schlosser Technik apto is a premium replacement cockspur with flexible screw fixing centers. It is suitable for many applications between 9mm and 21mm. It is also easy to put in, key locking and available in various finishes.

This handle is suitable for tilt and turn windows, however, it is not suitable for the side opening casement windows (these use the tilt and pivot separately). It can be used to replace old or damaged handles on uPVC or aluminium frames using rivets instead of screws - the only difference being the method of attachment. You'll need the use of a rivet gun as well as rivets to attach this handle on your existing window frame.

Espagnolette

The locking mechanism of your uPVC window is the shootbolt or espagnolette lock. They are a typical feature in older homes and offer both aesthetics and security for your home. Espagnolette handles are offered with key-locking and non-key-locking mechanisms, and are available in both crank and inline styles. They can also be a straight or curved style. The key-locking push button adds additional security by preventing the door handle replacement from being pushed open from the outside by the long, thin screw driver stuck between the frames - a common way of committing burglary!

GB DIY Store offers a wide range of espagnolette handles. Each one has a different spindle length which protrudes out from the back of the handle, therefore when replacing your espag handles, it's vital to measure the current handle's spindle length to ensure you receive the right size replacement handle. After you've determined the spindle length of the handle you currently have, browse our range of espag handles for bifold doors to locate the ideal design for your windows.

We stock a fantastic collection of white upvc door handle inline espagnolette handles that come in key-locking and non-key locking options. They are available in a variety colors and spindle lengths so you can match the new handles to your existing window frame and décor. Our espagnolette handle collection includes classic and modern designs and contemporary styles. Each replacement handle comes equipped with five different sizes of magnetic spindles that range between 15mm and55mm so that you can easily attach the handle to your windows without needing to buy the correct screw size!

A clever rosette at the back of the rose makes sure that the spindle can be inserted using a left-hand lever or right-hand lever. This helps prevent any mishaps. A spindle made of metal is used to secure the espagnolette handle. The handle is held in place by an innovative mechanism called a click-fit which is activated by rotating the handle with a hand, revealing an audible "click".