12 Companies Setting The Standard In Fiat Panda Key Fob Replacement

Reasons Your fiat keys replacement 500 Key Fob Won't Work

A key fob for Fiat spare key 500 makes it simple to open doors and start your vehicle. There are a myriad of reasons why the key fob might stop working. This could be due to a dead coin battery damage to the receiver module, problems, and interference.

This listing is for a NEW replacement fiat punto key programming Flip Key Remote - an exact replica of the Ilco brand that must be programmed professionally by a local automotive locksmith (click here to search for a Locksmith Search). It includes trunk, lock and unlock buttons.

Dead Coin Battery

A dead battery is the most frequent cause of your 500 key fob not working. Modern key fobs operate with a limited range of operation, and must be within some feet of the vehicle to operate. If you're far from your vehicle and press the keyfob button it will not respond, and display the message "Key Fob Not Detected".

If this occurs you need to replace the battery of your coin-cell (Part Number CR2032) by a brand new one of a reliable brand, like Panasonic Duracell or Energizer. They are typically available at your local hardware store or on the internet.

You can test the coin-cell battery by pressing the buttons while standing near your fiat punto key 500. The parking lights should blink and the key fob should operate the lock and unlock switch.

If your fob's key isn't working after replacing the battery, there might be water damage that has prevented it from communicating with the module inside your vehicle. Water damage can occur in a number of ways, from the slightest splash to submerging your fob in salt water at the beach. If you suspect your fob was exposed to water, you can try placing it in a dry rice bag to draw the moisture back out. If this isn't working, you'll need to have the fob replaced by an auto locksmith or dealer.

Water Damage

The fob does have rubber seals that keep water from the electronic chip inside, submerging it in the ocean or washing it in a machine can cause water damage. Saltwater can be particularly harmful to the fob's circuit board that can cause it to short out and eventually die. In the event that you let your fob get wet, it's not an ideal idea but if you drop it in the water in a cup or do not remember to remove it from your pocket before you run the washer and you don't have a chance, don't give in.

Remove the battery first. Clean the electronic chip with isopropyl alcohol or a similar product and then dry it thoroughly before replacing the battery. Test the fob next to determine if it's functioning. If the key does not work, it may need to be reset. This is typically done by a professional or dealer auto locksmith.

If your key is old and not programmed for your vehicle then you'll need to replace it completely. A professional locksmith for automotive can do this job. The locksmith will require the key to be cut to match the car's ignition. They'll also need to reprogram the fob for the car's system. This is a simple and cost-effective procedure that is usually completed in the next day.

Receiver Module Issues

One of the most common reasons your 500 key fob might stop functioning is because it's out of range. The remote has a range of 30 feet. Therefore, in the event that you are far away from your vehicle it will not respond to your commands. You can solve this problem by moving the remote closer to your car until it responds.

If you've replaced the battery on your coin (commonly called a "button" or "watch") and your fob still won't work, it could have an internal circuit board issue. In most cases, reprogramming the fob will fix the problem. You can find the procedure for the majority of vehicles on YouTube or in the owner's guide.

It could be necessary to replace the clips made of metal that hold the coin batteries in place. If they lose tension it could hinder the battery from being seated properly and could cause the remote to malfunction.

In rare instances, the fob can become out of the vehicle's sync because of software or hardware problems. This could cause a significant trouble, but you could frequently fix this issue by visiting a local dealer or auto locksmith to have them reprogram your fob for you. In certain situations, they may need to reinstall the software on your body control module, as well.

Interference

Interference can also cause the key fob to not receive or transmit signals. This could happen if the key fob is close to the radio transmitter (cell phones or radar detectors) or another source of electromagnetic radiation. Other reasons the key fob may not function include a poor connection to the buttons or the internal chip, or water damage.

If the key fob suddenly stopped working, suddenly or after trying every option at home to resolve it e.g. It could be a defective 500 receiver module in the event that you've tried replacing the battery, reprogramming it, or using an alternative key fob. The receiver module, which is located beneath the dashboard, receives radio frequency signals from your key fob. It converts them to electronic commands that the vehicle interprets.

Luckily, there is an easy method to reset every single system on board in your 500 keys, including the key fob. Disconnect the 12 volt battery for approximately 15 minutes by removing the negative cable first then the positive cable. Reconnect the battery. This will eliminate any residual electricity and restart the car's computers. This could help get your key fob working again. If the issue continues, you should consult a certified technician. They will be able diagnose the exact cause of problems.