20 Trailblazers Leading The Way In Saab 93 Key Fob

How to Replace a Saab 9-3 Key

The Saab 9-3 has an impressive amount of appeal for drivers. It has good visibility and a strong performance engine. It also has a top safety rating.

It is nevertheless important to make sure that you have at minimum two keys that are working for your vehicle. It can be expensive to replace a key if you lose it.

How to replace the ignition Key in the Saab9-3

You have to replace your car keys if it won't turn. This guide will show you how to replace the ignition key on a Saab 9-3. You'll need a new key, a new reprogrammable battery as well as a new key-fob cover.

Contrary to earlier models, modern saab centre milton keynes automobiles use a transponder on the key-fob instead physical key to unlock and start the car. The reprogrammable batteries in the key-fob inevitably get worn out, and eventually will not be able to hold charge. This is especially true if you use the same key for the same lock.

The good part is that the battery can be replaced easily by an experienced locksmith. You can also do it yourself if have the proper tools and a bit of patience. The first step is to separate the key-fob. This is done by inserting a flathead screwdriver in the slot that is located in the middle of the case. The plastic is thin, and is easily damaged.

Once the case is open and the case is opened, you can make the new key by combining the lower portion of the previous key with the banana and transponder on the new key. This will ensure the new key is properly paired to your CIM and could make a significant difference when replacing the sole key for your Saab 9-3.

How do I replace the ignition Key on a Saab 900

If you don't have two keys, you'll need to remove the dashboard and steering wheel in order to access the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you are able to remove the trim and dashboard pieces around the steering wheel. Once the dash has been removed, you can put a screwdriver into the hole at the back of the ignition switch and pull it out.

The ignition cylinder is fitted with a key lock that could prevent the vehicle from starting if it does not contain the key. If the ignition switch of your 900 isn't functioning, check the key to determine whether it's in the lock or is stuck in the barrel of ignition. It's also an excellent idea to rotate your keys often and keep them clean so that one doesn't become bent.

Saab cars differ from other cars in that they do not have traditional metal keys. Instead, the car detects electrical signals that come from the key fob by using the use of a specific microchip.

If you lose your sole working key fob the dealer will charge you top dollar for replacing the computer module (known as the CIM). We can however reprogram your computer's EEPROM, and then prepare it to accept new keys without replacing it. This can save you over 50% of the price the dealer charges! We call it the SAAB KEY PROGRAM. Find out more about it here!

How to replace the ignition Key in a Saab9-5

The metal part of a classic Saab key is simple to copy, and it's also not a major obstacle against theft of a vehicle. The real protection comes from the electronic part in the key-fob, which has a chip inside which recognizes your car once it's inserted into your ignition switch.

Saab spare key has relied on the technology of this anti-theft device for over a decade. It's not as effective as a door lock however, it makes the theft of your car a lot harder. Every Saab owner must keep a spare saab car key key in their car.

The majority of new Saabs come with two keys from the factory, but you can buy more keys from a dealer through a special handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 vehicles, that have more modern, more advanced features that require a key-fob.

The dealer will replace the CIM or TWICE module of those cars if the keys are lost, and charge you a high price for doing it. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.

How to Replace the Ignition Key on a saab fob key replacement XC90

If your SAAB 9-3 key fob is experiencing issues turning the barrel of the lock it could be time to replace it. Fortunately, the process is fairly simple and doesn't require you to visit a dealer. You can do it at home using just a few basic tools.

First, you'll need to prepare the new keys. Before you start, disable the anti-theft feature by placing blocks under your rear wheels, and then releasing your handbrake. Insert the key into the ignition and turn it to the "on" position. This will activate the accessories, but not start the engine. Repeat this procedure five times and leave the key in the on position.

Then you'll need to buy a new case for your key fob. You can get these at any auto parts store and they're typically very affordable. You can get them without electronics based on the model.

To open the case you need to gently push the screwdriver with a flathead into the slot in the middle. The case should break easily and, once you have it, you'll be able to gain access to the internal electronics. Use a flathead screwdriver to gently remove the electronic components.