5 Laws That Can Benefit The Saab 93 Key Fob Industry

How to Replace a Saab 9-3 Key

The Saab 9-3 has an impressive attraction for drivers. It is well-lit and has an efficient engine. It also has a top safety rating.

It is essential to have two keys that are compatible for your vehicle. If you lose only one key, it can be expensive to replace it with a new one.

How to Replace the Ignition Key on the Saab 9-3

You'll have to replace the car key when it doesn't turn. This guide will walk you through how to do it on a saab 93 key fob 9-3. You'll need a replacement key and a new battery that can be reprogrammed and a brand new key-fob cover.

In contrast to older models, the majority of modern Saab cars have a transponder in the key-fob rather than a physical key to unlock and start the vehicle. The reprogrammable batteries that are in the key-fob will eventually get worn out, and eventually can't hold any charge. This is especially the case if you use the same key in the same lock.

A professional locksmith can replace the battery fairly easily. You can also do it yourself if you have the right tools and a bit of patience. The first step involves separating the key-fob. This is done by inserting a flathead screwdriver into the slot in the middle of the case. It is essential to work slowly, as the plastic is very thin and is susceptible to damage.

Once the case has been opened, you can make the new key by combining lower part of the key from earlier with a transponder and banana. This will ensure that the new key is properly connected to your CIM, which can make a significant difference when replacing the sole key on your saab replacement key programming 9-3.

How do you replace the ignition Key in a Saab 900

If you don't have two keys, you'll have to take off the steering wheel and dashboard to gain access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off the trim and dashboard pieces that surround the steering wheel. After the dashboard has been removed, you can place an opening with a screwdriver behind the ignition switch.

The ignition cylinder houses an ignition lock that can prevent the vehicle from starting if the key isn't in it. If the ignition switch on your 900 isn't working properly, check if the key is in the lock or is stuck inside the barrel. You should also rotate your keys and keep them clean to avoid breaking.

Saab cars differ from other vehicles because they don't use traditional metal keys. The car instead recognizes the electric signals generated by the key fob by using the use of a special microchip.

If you lose only one working key fob, your dealer will charge an extra fee to replace your computer module (also known as the CIM). However, we can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you over 50% of the cost the dealer charges! We call it the SAAB Key PROGRAM. Find out more here!

How to Replace the Ignition Key on a saab key replacement cost 9-5

The metal part of a traditional Saab key is easy to copy, and it's not much of a barrier against vehicle theft. The real security is the electronic component that's in the key fob, which contains a chip which recognizes your car once it's put into the ignition switch.

Saab's anti-theft system has relied on this technology for more than a decade. It's not as efficient as a physical door lock, but it makes stealing your car much more difficult. Every Saab owner should keep an extra Saab key in their vehicle.

The majority of new Saabs come with two keys in the factory, but you can buy more keys from the dealer with a handheld computer known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 vehicles which are more modern and more advanced features that require a key-fob.

If you lose all keys and the dealer replaces your CIM or TWICE modules and bill you a premium for it. However, we can reprogram the EEPROM on your computer and set it up to accept new keys, without having to replace the expensive modules.

How do I replace the ignition Key on a Saab XC90

If your SAAB 9-3 key fob starts having issues turning the lock barrel It could be the time to replace it. The process is relatively simple and doesn't require you to visit a dealer. You can do it at home using a few basic tools.

It is first necessary to prepare the new keys. Before starting, make sure that the anti-theft device is disabled by placing blocks on your rear wheels and engaging the handbrake. Place the key in the ignition and turn the key to the "on" position. This will activate the accessories but will not start the engine. Repeat this five times, then turn off the key on the "on" position.

Then you'll need to buy a new case for your key fob. They are readily available at many auto parts stores and are generally quite affordable. Depending on the model, you may even get them without any electronic components.

To open up the case, insert a flathead screwdriver in the slot located in the middle. Gently work it. After you have split the case, you will have access to all the internal electronics. Use a flathead screwdriver to gently remove the electronic components.