9 Lessons Your Parents Teach You About Saab 93 Key Fob

How to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that has a lot of driver appeal. It is well-lit and has a strong performance engine. It also has an excellent safety rating.

However, it's important to make sure that you have two keys that work for your car. It is costly to replace a key in the event that you lose it.

How to replace the ignition Key on the Saab 9-3

You have to replace your car keys in case it isn't turning. This guide will walk you through the steps to do it on a saab key replacement 93 key (Suggested Web site) 9-3. You'll need to replace the key, buy an additional reprogrammable cell and buy a brand new case for your key-fob.

Modern Saab models utilize transponders instead of a metal key to unlock the car and start it. The reprogrammable batteries that are in the key-fob inevitably get worn out, and eventually aren't able to hold any charge. This is particularly when you use the same key for the lock you have.

A professional locksmith can change the battery quite easily. You can also do it yourself if have the proper tools and a bit of patience. The first step involves separating the key-fob. Insert a flathead into the slot that is in the middle of your case. The plastic is thin and easily damaged.

After the case has been opened, you can create the new key by combining lower portion of the old key along with the transponder and banana. This will ensure that the new key is connected to the CIM properly, which can be the difference in replacing the sole key for your Saab 9-3.

How do I replace the ignition Key on the saab 93 key replacement 900

If you don't have two keys, you'll need to remove the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dashboard is removed, you can insert a screwdriver in the opening behind the ignition switch.

The ignition cylinder is fitted with a key lock that can stop the vehicle from starting if it does not contain the key. If the ignition switch on your 900 doesn't work properly, check whether the key is inside the lock or within the ignition barrel. It is also important to rotate your keys and keep them clean to prevent being bent.

Saab cars differ from other cars due to the fact that they don't have traditional keys made of metal. Instead, the car can recognize the electric signals of the key fob through a chip that is specifically designed for it.

If you have lost your only working key fob, the dealer will charge the highest dollar for replacing the computer module (known as the CIM). We can reprogram the EEPROM of your existing computer and enable it to accept new keys, without the need for replacement. This will save you up to 50% of the price the dealer charges! This is the saab 93 key programming KEY PROGRAM. Find out more information about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal part of a classic Saab key is easy to copy, and is also not much of an impediment against vehicle theft. The electronic portion of the key-fob comes with an embedded chip that can identify the car when the key is inserted into the ignition switch.

Saab's anti-theft system has relied upon this technology for more than 10 years. It's not as secure as an actual lock on the door but it makes the process of stealing your vehicle harder. This is the reason why every saab car keys owner should keep an extra key in their possession.

The majority of new Saabs come with two keys from the factory, but you can buy more keys from a dealer through a special handheld computer, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 vehicles, with more modern, newer features that require the use of a key-fob.

The dealer will replace the CIM or TWICE module on those cars if keys are lost. They'll cost you top dollar for this. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.

How do you replace the ignition Key in the Saab XC90

If your SAAB 9-3 key fob begins having problems turning the lock barrel It could be the time to replace it. The procedure is quite simple and doesn't require you to visit a dealer. You can do it at home using just a few simple tools.

First, you'll need to make the keys for your new car. Before starting, make sure that the anti-theft system is disabled by placing blocks on your rear wheels and releasing the handbrake. Insert the key in the ignition and turn the key to the "on" position. This will activate the accessories, but not start the engine. Repeat this procedure 5 times, and then keep the key in the "on" position.

Next, you'll need to purchase a new case for your key fob. You can find these at any auto parts store and they're typically quite affordable. Depending on the model, you may even get them without any electronics.

To open the case, place an flathead screwdriver into the slot that is in the middle and slowly work it. The case should break easily and, once you've got it open, you'll get access to the internal electronics. To get rid of the electronics, use a small screwdriver and try to pry them out with a gentle force.