Why Ghost Immobiliser Problems Is Fast Becoming The Most Popular Trend In 2023

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the ghost autowatch immobiliser Immobiliser. It is discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This allows your vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security due to the increase in vehicle theft. There are a myriad of aftermarket security devices available, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may assist in finding your car in the case of theft, it will not stop the crime from happening in the first instance. Immobilisers, in contrast, do exactly what they say on the tin: they disable your car's motor to prevent it from being started. The Autowatch ford fiesta ghost installer (visit the following web site) is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

The ghost device makes use of the buttons on your car to generate a unique sequence which must be entered to allow the engine to begin. This can be accomplished using the indicator stalk windows or heater buttons. In addition it is possible to use an app for mobile devices that can function as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is a great solution if you want to give your car to valet parking or maintenance. The immobiliser will stay in operation.

The Ghost is an unique and innovative device that operates with the buttons on your vehicle rather than as a standalone device. This means it's not just a powerful security measure against theft from your vehicle but also a transferable device over to any future cars you own, making it much more of an investment than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security system that guards your car from key cloning, hacking and ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which is the most common method used by car thieves to circumvent existing immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, centre console, or doors, to create an unique sequence of disarming. The sequence can be extended by 20 presses for extra security. The iPhone app allows a single, authorised connection with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost also stops thieves from stealing a new key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only start when a valid PIN code is entered. It is able to be operated temporarily in valet or service mode (with the appropriate parameters, like 30mph speed limit), so you can give your car to valet or service without needing to enter a code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals to block your car's system from going through its normal initialization process until you enter the passcode you have created. The system can be activated or deactivated by using your smartphone app without the need for extra wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. This sends a message to the ECU. The car will begin to start if the correct code is sent. However, if a transponder from another vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning, and even key theft. The only way that a burglar could take your car is by physically towing it away and even then, they wouldn't be able to drive it.

Ghost makes use of buttons in your vehicle, including the indicator stalk, the steering wheel, as well as the door panels, to generate an individual PIN code that needs to be entered to use your car. This is performed without the need for additional hardware like keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is concealed within the vehicle, so it cannot be removed or disabled by thieves. It's more difficult to remove from a car alarm which requires disarming via an action sequence. This makes it a great supplement to a GPS tracker that can assist in locating your car after it's been taken.

Override of emergency PIN code

You don't have to look long on social media sites to find stories or videos about cars that have been stolen using the latest technology tools. This includes key-cloning devices and hacking devices that allow you to start your car without your original key fobs.

The ghost immobiliser installers near me immobiliser has been specifically designed to prevent this, and give you an additional layer of security in order to protect your vehicle from being targeted by thieves. It works by creating an unique pin code push sequence using your existing buttons on the steering wheel, door panel and centre console. This unique PIN is entered along with your original key fob in order to prevent the engine from beginning. The unique override PIN can be found on the black card that you will receive following your installation and is easy to remember because there are no LED indications.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Unlike most other security systems, which have an engine relay bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to shut down a vehicle completely, by sending an electronic block to the ECU and engine.

They can also be linked to a separate analogue alarm, immobiliser or tracker. This should be specified prior to installation. They are also service/valet mode compatible and are a great alternative to a tracker you have your car checked for an electrical fault at the dealership.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen with the owners' keys. With easy access to key cloning tools and door lock pick sets, it is now how much is a ghost immobiliser easier for thieves to take your joy and pride. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your car has been stolen.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent as it doesn't use radio frequency or a key fob. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents the addition of the key to a new one or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, centre console and door panels. A unique and reversible PIN code sequence of up to 20 digits has to be entered before you can start your car.

This is the first aftermarket CAN-bus immobiliser that has been designed. It can prevent your vehicle from being started or driven when you don't enter a PIN code first. If you are driving away with the device in motion, an indicator will appear on your dashboard and flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate as normal. If you don't enter your PIN code at this time the indication will continue to flash and will require a new PIN code every attempt to start your car.